Galvanized expanded metal mesh is supplied with diamond, hexagonal, square and decorative openings. Expanded mesh sheets are mainly for decorative facade panels, walkway grate, fencing, automabile, lathing and other uses. Detail specifications, standards, surfaces, finishes and applications.
OUR CAPABILITES
Galvanized expanded carbon steel panels
Technical specification for Malta:
Material: Manufactured to table 3 of BSS 405:1987 or equivalent.
Galvanized to MSA EN ISO 1461:2000.
Mesh dimensions: S.W. 22.5mm, L.W. 51mm.
Strand dimensions: Width 3.12mm, Thickness Bare 3mm.
Size of sheet: S.W. 915mm, L.W. 1830mm.
Expanded mesh for Netherlands market:
Size: 2000 mm * 62000 mm
Hole size: 40 mm * 16 mm
Material thickness: 3 mm
Material hot dip galvanized.
Common specifications for Czech market
Finishes: Hot dip galvanizing
Sheet length: 835, 1035, 1335, 1101, 905, 1350 mm
Width: 395, 500, 595mm
Sheet thickness: 2mm
Structure: Expanding stretched
| Dimensions and materials: |
| Metal Net 2x835x395-40/28x2.5 |
| Metal Net 2x1035x395-40/28x2.5 |
| Metal Net 2x1335x395-40/28x2.5 |
| Metal Net 2x1101x500-40/28x2.5 |
| Metal Net 2x905x500-40/28x2.5 |
| Metal Net 2x1350x595-40/28x2.5 |
Square expanded mesh:
Mesh size : 76mm x 76mm
Square aperture : 50mm x 50mm
Strand width : 3.3mm
Strand thickness : 3.0mm
Weight : 2.3 Kg / m2
Material : Black or Steel Galvanized
Sheet size : 1250mm x 2500mm
Standard square hole expanded metal mesh
Diamond hole expanded steel mesh, in rolls
Common size for Euro market
Diamond mesh (2.0x2.0x6x8)x855(W)x1455(L) mm (7.27 kg)
Diamond mesh (2.0x2.0x6x8)x1055(W)x2110(L) mm (13.00 kg)
Diamond mesh (1.5x1.5x6x8)870(W)x2100(L) mm (5.60 kg)
Technical details:
Steel Mesh Expanded in 1.5mm and 2mm in thickness
Specification of materials
Steel type : SPCC - Cold Roll - JIS Standard according to Mill Test from Suppliers
General dimension of Mesh:
Width: min 420mm
Length: max 2170 mm
Thickness: ±0.1mm
The tolerance of allowance weight is: ±3%
Note: Other dimensions of mesh depends on specific orders
Type of mesh 2.0 mm in thickness
| LWD=11 ±0.2 mm SWD=8.5 ± 0.2 mm Strand width Strand thickness Weight of mesh/m2 Hardness Yield strength Tensile strength Elongation |
LWO - 7 ± 0.2 mm SWO= 4‘5± 0.2 mm 2 ± 0.1 mm 2 ± 0.1 mm 5.84 kg/ m2 HB*57 235 Mpa 300 Mpa 47 -r 50 % |
Type of mesh SPCC JIS G 3141 with 1.5 mm in thickness
| LWD = 11 ±0,2 mm LWO = 8 ±0.2 mm Strand width = Strand thickness Weight of mesh /m2 |
SV\/D = 9 ± CK2 mm SWO = 6 ± 0.2 mm 1.5 ± 0.1 mm 1.5 ± 0.1mm 3.07 kg /m2 |
Average Of Hardness HR30T 45
(Rockwell Superficial 30-T Scale -1/16" Ball Penetrator,30kgf Load)
Yield strength Mpa 200 Mpa
Tensile strength Mpa 270 Mpa
Elongation % 37 + 40 %
Note：
LWD: Nominal dimension Long Way of Design
SWO: Nominal dimension Short Way of Design
LWO: Long Way of Opening
SWO: Short Way of Opening
Common size for Central America market:
19MM SWD (diamond height):
Carbon steel 1.5MMx1219MMx2438MM
Carbon steel 2.0MMx1219MMx2438MM
Carbon steel 3.0MMx1219MMx2438MM
Stainless steel 2.0MMx1219MMx2438MM
Stainless steel 3.0MMx1219MMx2438MM
13MM SWD (diamond height):
Carbon steel 2.0MMx1219MMx2438MM
Stainless steel 2.0MMx1219MMx2438MM
Aluminum 1.5MMx1219MMx2438MM
Common size for USA market:
OEM accepted
Standard hexagonal expanded metal mesh
Long diagonal = 6.0mm
Short diagonal = 3.5mm
Pass = 1.0mm
Thickness = 0.6mm
Square mesh:
Long diagonal = 4.0mm/6.0mm
Short diagonal = 2.9mm/4.5mm
Pass = 0.6mm/0.6mm
Thickness = 0.6mm/0.6mm
Sheet size 240 x 25mm
Applications
PVC Coated Galvanized Steel Fencing
Common size for USA market:
½" x #16
¾" x #9
2" x #9
Material: Carbon steel flattened, Pre-galvanized and powder coating at options
Sheet size:
4' x 8'
4' x 10'
5' x 8'
5' x 10'
Galvanized Expanded Panels for Decoration
Facade mesh of sheet metal perforated and expanded
Metal Panel for Interior Architectural Design
For Amerca market:
Galvanized steel without color coating
Partition Panels
Golden powder coated steel mesh for wall and partition decoration
Common size for India market:
15 mm thick mesh, 3 mm sheet metal
Heavy Duty Walkway Mesh Grating
Heavy duty expanded metal walkway mesh, grating type, for Pakistan market: width of mesh 900mm,
maximum load 2.5 KN/sq.m
Common size for New Guinea Market, Mesh: 135x45mm, 75x30mm, 60x25mm, of Steel and aluminum
Panel size:
2.4 x 1.2m,
3.0 x 1.2m,
2.3 x 0.75m,
2.4 x 1.2m
Hexagonal metal mesh for Automobile parts
Sheet Material - Steel cold- rolled
Dimensions for India market:
L=12.5mm
S=6.5mm
W=0.8mm
T=0.8mm.
Metal lathing for concrete forming
0.30mm thick, 12x8, rib height 5mm, rib distance 100mm, lathe width 610mm.
Min. tensile strength:270N/mm2.
Material: Q195/SGCC
Finish: Hot dipped galv.
Hy rib type expanded mesh, width 450mm, length 2200mm, thickness 0.3mm
Rib lath, 600mm width, 2100mm length, thickness 0.25mm
Material: Galvanised
Diamond expanded mesh coils provide a secure key for plaster and stucco applications, for joint and crack reinforcement.
Mesh pattern: Diamond hole
Opening : 25 X 25 MM
Wire Diameter : Ø 1.6 MM
Width : 1.2 M x Length : 30 M
Tensile Strength : 415 - 427 N/mm2
Elongation : 21 - 26 %
Coating Thickness : 100 - 120 GSM Coating
Expanded mesh sheet surface must be free from all cracks, burrs, warp, subclass, holed and pock-market
Cutting must be made clean and left no rough edges, no marks on its surface.
Steel mesh must be flatten, not deformed and crooked on surface will be acceptable.
Bond on the surface of mesh products must be strong enough
Note: The process of cutting expanded metal pieces.
Finishing
No deformation or other defects that will affect the function.
In delivering our expanded mesh, the labes clearly identifying product and manufacturer name including mesh thickness, sheet dimensions, quantity, style, standard, type of metal, and PO No, produce date.
All expanded mesh is sprayed by anti rusty oil with the reasonable amount of oil to make sure mesh wilt be not rusty.
Make sure oil sprayed enough to avoid rust, and reasonable for welding.
Expanded steel mesh has to be packed on strong steel pallet for unloading easily.
Quantity of mesh to be loaded on strong steel pallet, and each pallet is covered by plastic cover to make sure the mesh will be not rusty and fall off pallet during transit and unload.
A test report certified to be passed for each stock size In each shipment.
All our metal meshes are tested and produced according to international standards, basically as following unless otherwise requested:
Material: Manufactured to table 3 of BSS 405:1987 or equivalent.
Steel type : SPCC - Cold Roll - JIS Standard
Galvanized to MSA EN ISO 1461:2000.
Test based on 3IS Z 2245 (1992): Rockwell Hardness Test- Test Method
JIS Z 2241 (1998): Method of Tensile Test For Metallic Materials
JIS Z 2248(2006): Metallic Materials Test - bend test
QA should inspect actual dimensions: SWO, LWO, SWD, LWD, and bending test
Bending angle 180 0 => No crack
